Difference between revisions of "Main Page"

From Bloominglabs
Jump to: navigation, search
(Introduction to Metalworking: Make a Stool)
Line 5: Line 5:
 
Bloominglabs is Indiana's first hackerspace (also known as a makerspace). We are a group of group of people who rent a shared workshop where we can build projects both collectively and individually. Our space is located at 1840 S. Walnut Street.  
 
Bloominglabs is Indiana's first hackerspace (also known as a makerspace). We are a group of group of people who rent a shared workshop where we can build projects both collectively and individually. Our space is located at 1840 S. Walnut Street.  
  
[[Public meetings|We will re-open to the public for Wednesday evenings]] starting July 14th. 7pm until 10pm. Our open hours are family friendly.
+
[[Public meetings|We are open to the public for Wednesday evenings]] since July 14th. 7pm until 10pm. Our open hours are family friendly.
  
  

Revision as of 13:50, 5 August 2021

Welcome to Bloominglabs, Bloomington's very own hackerspace!

A space for sharing tools and knowledge to make stuff

Bloominglabs is Indiana's first hackerspace (also known as a makerspace). We are a group of group of people who rent a shared workshop where we can build projects both collectively and individually. Our space is located at 1840 S. Walnut Street.

We are open to the public for Wednesday evenings since July 14th. 7pm until 10pm. Our open hours are family friendly.


Contents

Who are we?

We are a bunch of people that want to do interesting things and explore the world and technology around us. Expression of this interest takes at least as many forms as we have members, and often employs an amalgam of found and newly-constructed hardware and/or open-source and self-authored software components, but may be as simple as screwing some pieces of wood together to make a useful tool we don't have yet.

Bloominglabs was forged from the Bloomington Hackerspace Initiative and the former IU Robotics Club.

  • Read our Bylaws for a more formalized overview

What is a hackerspace?

A hackerspace is a physical location where people can share resources for their own creative pursuits. It's also a resource where people can come in off the street and advance their own knowledge. In urban locations it can often be hard to find places to weld/build/make noise and keep projects on-going without having to tear down and put-up your work each evening. With a hacker space people can work on their projects and not worry about annoying their neighbors or spouses. The social aspect is also an incredibly important component. Having people to bounce ideas off of and discuss your projects with when you get stuck is a great thing.

Stay informed

Support

Bloominglabs Incorporated is a non-profit registered within in the state of Indiana and has 501(c)3 charitable status. Want to make a donation with PayPal? Please use this link:

  • (Note to members - this link should not be used for paying membership dues)

Also, we have an Amazon Smile Account For Bloominglabs. If you use that link to place an order on Amazon, we get a little cut. Thanks!

Members, this is how we process cash and hardware donations: Donations.

Hardware Donations

We appreciate hardware donations too! However, please ask before bringing any item donations and arrange to meet someone for the handoff. contact@bloominglabs.org This gives us a chance to decide what of your donation is useful to us currently. For things we can't use, we'll help you figure out other groups in Bloomington who would appreciate them or help you determine the best way to dispose of them.


Current & Upcoming Events

(PastEvents)

Makevention! 2021

Bloomington's Makevention MakerFair 2021 is being planned right now and is scheduled for August 28th, 2021. Please e-mail contact@makevention.org if you are interested in being involved.

Public meetings!

Returning July 14th, 2021.

  • Wednesdays from 7pm until 10pm
  • E-mail contact@bloominglabs.org or ask in Slack if you would like to arrange access to the space at another time.
  • Come build projects, ask questions, teach things, and learn stuff
  • All ages and everyone is welcome

Upcoming Workshops

Workshops are for age 12 and older unless otherwise specified. See our Workshops page for more information.

Introduction to Parkour

Mondays, July 19th-September 6th, 2021 -- 7:00 PM to 8:30 PM

  • 8 weeks, 12 hours total
  • Format: In-Person, at Bloominglabs, 1840 S. Walnut St, Bloomington, IN
  • Cost: $100, $70 for members
  • Drop-ins welcome, individual sessions are $15, or $10 for Bloominglabs members. Pay cash or card on location.

Always wanted to learn Parkour? Take the leap, with our in-depth Basic Parkour class: brought to you by BPK and Bloominglabs! You’ll learn all the fundamentals of the Art of Movement, in a safe and fun environment.

Mondays, 8 sessions, Starting July 19th

  • July 19th: Landing and Precision Jumps
  • July 26th: Vaults
  • August 2nd: Kongs
  • August 9th: Flows with learned skills
  • August 16th: Ukemi/Rolls
  • August 23rd: Wall Skills
  • August 30th: Beginning Freerunning
  • September 6th: Review all skills with flows

Introduction to Parkour

Build a P25 Digital Scanner with a Raspberry Pi and Software Defined Radios

Monday & Tuesday, July 26-27th, 2021 -- 6:00 PM to 9:00 PM both days

  • Format: In-Person, at Bloominglabs, 1840 S. Walnut St, Bloomington, IN
  • Cost: $50 for non-members, or $25 for members [bring your own equipment]
  • Optional equipment check: Tuesday July 20 (stop by any time between 7:00 PM and 9:00 PM to make sure you have everything on the required equipment list)
  • Maximum Class Size: 6
  • Registration deadline: Saturday July 17, 2021 (or when all seats are filled)

In this workshop you will create a police scanner using open source software and common off-the-shelf hardware. By the end of this workshop you will have your own scanner capable of receiving and decoding P25 digital signals, complete with a responsive web interface.

More information and Registration: Build a P25 Digital Scanner

Introduction to Metalworking: Make a Stool

Saturday, August 7th, 2021 -- Noon-5:00PM

  • Format: In-Person
  • Cost: $65, $45 for members
  • Maximum Class Size: 5

Part project class, part safety/skills training—this class orients you to the several fabrication tools Bloominglabs has to offer, as well as MIG welding techniques—culminating in a handmade metal stand. If you have ever wanted to learn about the metal shop, this class offers a realistic look at cutting, forming, welding, and finishing steel. Participants will learn the safety protocols, setup, and usage of several cutting tools to cut and form steel stock. They will practice setting up precise cuts, and then work to set these parts up in a way to accurately weld them together. Welding technique, safety, and finishing are offered in the 2nd half of this 4.5 hour class. Participants MUST come to class prepared with long sleeve shirts, long pants (NOT synthetic; wear denim, cotton, wool, or leather), a stocking cap or head covering, and leather closed-toed boots. Additionally, due to COVID-19, participants are expected to bring their own PPE which includes safety glasses, leather gloves, hearing protection, and wear a face mask but Bloominglabs does have some to borrow and isopropyl for cleaning.

Introduction to Metalworking

Check out Workshops to see even further into the future!

Current Initiatives

These are things we are working on, or would like to see, to improve the space. If you are interested in any of these, feel free to work on it! If you are unsure where to start, please get in touch!

  • improve the tool and workspace arrangement and cleanliness
  • purge excess junk
  • vend snacks and drinks (we used to do this at the previous space, but haven't since moving) Achieved!
  • revive the asset management system, and add our new assets to it
  • make Bloominglabs's web presence friendlier
    • The page you get when people from the public go to bloominglabs.org has an overwhelming amount of information on it.
    • The New Members page and the Membership Manual should be merged together.
    • In general, it would be great to see more participation in the wiki, especially on the [Projects] page.
    • It might be good to have a page that lists all members with their name, picture, username, email, interests, areas of the space they are familiar with, etc.
  • make the 3D Printers more reliable, make the 3D printing process easier, and spread the knowledge
  • wire the CCTV system
  • wire speakers in the lounge (and maybe in the classroom)

Public meetings and Membership

Currently we open to members but are closed to the public until the pandemic situation improves.

Despite this we are still accepting new memberships! Since we are closed to the public for the time being please send mail to contact [at] bloominglabs dot org to arrange a tour and to learn more about our on-boarding process. Please see the Membership Manual and New Members for more details.

During normal non-pandemic conditions we would meet every Wednesday from 7pm to 10pm and every Saturday from 1pm to 4pm at 1840 S. Walnut Street. These meetings were open to the public; anyone was welcome to attend. Having access to tools is only part of the equation. Socializing with people and learning from each other is another large benefit from our group. Pretty much whatever people want to work on or learn is fair game. If it's cool and interesting you'll find somebody who's interested.

Nearby Hackerspaces/Makerspace or initiatives:

Other Cool Groups in Bloomington & Monroe County

Special Wiki Pages

Uploaded files

Personal tools