Difference between revisions of "PrintrBot Play"

From Bloominglabs
Jump to: navigation, search
(Firmware reloaded - progress but no cigar yet.)
Line 15: Line 15:
  
 
All seems to be working fine now except '''auto-leveling''' Z-axis which is a '''show stopper''' : (
 
All seems to be working fine now except '''auto-leveling''' Z-axis which is a '''show stopper''' : (
 +
 +
 +
[[Category:Tools]]

Revision as of 15:13, 24 February 2017

A pre-assembled Printrbot Play (model 1505) was donated around 7 November 2016.

Documentation can be found on this Google Drive folder.



Printer has been in a nonfunctional state.

February 23, 2017 reloaded bootloader and firmware with avrdude and a USBtinyISP programmer.

Reference reprap.org/wiki/printrboard

BootloaderHID.hex play-0.6.hex

All seems to be working fine now except auto-leveling Z-axis which is a show stopper : (

Personal tools