PrintrBot Play

From Bloominglabs
Revision as of 23:48, 19 November 2017 by Avh.on1 (Talk | contribs)

Jump to: navigation, search

A pre-assembled Printrbot Play (model 1505) was donated around 7 November 2016. It is one of several 3D Printers Bloominglabs has.

The complete, official documentation can be found on this Google Drive folder.


Original Condition

When the Printrbot Play was donated, it was nonfunctional. On February 23, 2017, Apple reloaded the bootloader and firmware with:

The controller board, firmware, steppers, and sensors seem to be working fine.

Challenge now is test various filaments and to locate printer in a more permanent location with a dedicated ag150.

Personal tools