From jtillots at gmail.com Thu Aug 4 13:40:26 2016 From: jtillots at gmail.com (Jenett Tillotson) Date: Thu, 4 Aug 2016 13:40:26 -0400 Subject: [Bloominglabs-announce] Makevention 2016 Message-ID: Makevention 2016 is almost here! The event will be August 27th from 10am until 4pm. If you would like to exhibit, please get your exhibitor application in now as the deadline is TOMORROW, August 5th. If you want to be part of the Bloominglabs' booth, contact Heath at ha_roush at hotmail.com. Please check out our website at: http://makevention.org/ There you will find a flyer, and we would love for you to put up a flyer or two. You can also find flyers on the front desk at Bloominglabs for the taking. There's also a Facebook event page for sharing here: https://www.facebook.com/events/1723291277884890/ We are also in need of volunteers for the day of the event. If you are interested, please sign up from the Volunteers page on the Makevention website. Hope to see you there! Jenett -------------- next part -------------- An HTML attachment was scrubbed... URL: From sundrycompost at gmail.com Thu Aug 18 12:53:17 2016 From: sundrycompost at gmail.com (sundrycompost) Date: Thu, 18 Aug 2016 12:53:17 -0400 Subject: [Bloominglabs-announce] [Bloominglabs-members] Air compr essor Message-ID: dosman via Bloominglabs-members wrote: >Greetings, > >Tonight I?d like to make a push to finish up the wiring on the new air compressor. At this point the last big step to get it running is to pull wire through the conduit from the sub-panel to the location it will be feeding (up and over the garage door). > >It should only take an hour to get the wire pulled, then another hour to finish the terminations and the outlet. The air compressor itself should be mounted on the wooden pallet currently leaning up against it. I?ll be enlisting helpers tonight, hopefully we can get this all done. > >Thanks, >-Nathan > > >_______________________________________________ >Bloominglabs-members mailing list >Bloominglabs-members at bloominglabs.org >http://www.bloominglabs.org/mailman/listinfo/bloominglabs-members From jtillots at gmail.com Fri Aug 19 08:41:25 2016 From: jtillots at gmail.com (Jenett Tillotson) Date: Fri, 19 Aug 2016 08:41:25 -0400 Subject: [Bloominglabs-announce] Makevention hauling help Message-ID: I need some help hauling 12 4X8 sheets of plywood from the store to Blabs this weekend. We could do it tomorrow before the open house or after the open house. I have a trailer we can use, but I do not have a vehicle to pull said trailer. Can anyone help out? Also, we'll need help hauling the plywood and possibly a few other things (laser cutter, etc.) to Makevention next Friday and back to Blabs next Saturday. So, even if you can't help this weekend but can next weekend, that would be great. Get back to me ASAP if you can help us out. I really appreciate the help! Jenett -------------- next part -------------- An HTML attachment was scrubbed... URL: From dosman at packetsniffers.org Fri Aug 19 22:43:07 2016 From: dosman at packetsniffers.org (dosman) Date: Fri, 19 Aug 2016 22:43:07 -0400 Subject: [Bloominglabs-announce] Bloominglabs flea market, openhouse, and Resale Trail Message-ID: <44F2EDC7-5E8D-43D7-B445-434A24404E47@packetsniffers.org> Greetings, Just wanted to let folks know that we?ll be open tomorrow (August 20th) from noon to 6pm as part of the Bloomington Resale Trail. We will have free popcorn: http://sustain.indiana.edu/programs/hoosier-to-hoosier/resale-trail.php Also in our parking lot will be the Artisan Alley art fair with artists, food trucks, and other vendors. Come check us out! -Bloominglabs http://www.bloominglabs.org -------------- next part -------------- An HTML attachment was scrubbed... URL: From jtillots at gmail.com Thu Aug 25 09:04:52 2016 From: jtillots at gmail.com (Jenett Tillotson) Date: Thu, 25 Aug 2016 09:04:52 -0400 Subject: [Bloominglabs-announce] Fwd: [MakeVention Committee] Radio story on WFHB last night In-Reply-To: References: Message-ID: Check out the Makevention radio spot that aired yesterday on WFHB. And make sure to tell all your friends to come to Makevention! It's going to be a great year. http://wfhb.org/news/saturday-is-the-4th-annual-makevention-makers-fair/ Jenett -------------- next part -------------- An HTML attachment was scrubbed... URL: From jtillots at gmail.com Thu Aug 25 21:42:38 2016 From: jtillots at gmail.com (Jenett Tillotson) Date: Thu, 25 Aug 2016 21:42:38 -0400 Subject: [Bloominglabs-announce] Help build Ultimate Foosball! Message-ID: I will be building the Ultimate Foosball game for Makevention tomorrow, Friday, at 7pm. Mouse and I will be hauling the game over to the Convention Center at 7pm and then we will unload it and start attaching the supports to the walls. We will also be connecting the wall pieces together. We will need people to help and drills to make the work go quickly. If you have a battery operated drill and a phillips screwdriver bit, bring them along and come help us assemble the game. With enough people, work should go quickly. You can either meet us at the space and we can go over together, or you can meet us at the Convention Center shortly after 7pm. It shouldn't take us too long to get the trailer hooked up and brought over. If you are coming, I would appreciate it if you dropped me a note. But even if you don't, come on by and lend a hand. Thanks in advance, Jenett -------------- next part -------------- An HTML attachment was scrubbed... URL: From torreaiworks01 at gmail.com Thu Aug 25 21:44:59 2016 From: torreaiworks01 at gmail.com (James Torre) Date: Thu, 25 Aug 2016 21:44:59 -0400 Subject: [Bloominglabs-announce] Help build Ultimate Foosball! In-Reply-To: References: Message-ID: Will be there, alas though I must parasitize others' tools. --jpt4 On Aug 26, 2016 1:42 AM, "Jenett Tillotson via Bloominglabs-announce" < bloominglabs-announce at bloominglabs.org> wrote: > I will be building the Ultimate Foosball game for Makevention tomorrow, > Friday, at 7pm. Mouse and I will be hauling the game over to the Convention > Center at 7pm and then we will unload it and start attaching the supports > to the walls. We will also be connecting the wall pieces together. > > We will need people to help and drills to make the work go quickly. If you > have a battery operated drill and a phillips screwdriver bit, bring them > along and come help us assemble the game. With enough people, work should > go quickly. > > You can either meet us at the space and we can go over together, or you > can meet us at the Convention Center shortly after 7pm. It shouldn't take > us too long to get the trailer hooked up and brought over. > > If you are coming, I would appreciate it if you dropped me a note. But > even if you don't, come on by and lend a hand. > > Thanks in advance, > > Jenett > > _______________________________________________ > Bloominglabs-announce mailing list > Bloominglabs-announce at bloominglabs.org > http://www.bloominglabs.org/mailman/listinfo/bloominglabs-announce > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ryanlkiser at gmail.com Fri Aug 26 13:29:00 2016 From: ryanlkiser at gmail.com (Ryan Kiser) Date: Fri, 26 Aug 2016 13:29:00 -0400 Subject: [Bloominglabs-announce] Help build Ultimate Foosball! In-Reply-To: References: Message-ID: I?m into this. I?ll see if I can snag any extra power drills today while I?m at it too. -Ryan >> On Aug 25, 2016, at 9:44 PM, James Torre via Bloominglabs-announce 'bloominglabs-announce at bloominglabs.org' via 33Mail wrote: >> Will be there, alas though I must parasitize others' tools. >> >> --jpt4 >> >> >> On Aug 26, 2016 1:42 AM, "Jenett Tillotson via Bloominglabs-announce" wrote: >> I will be building the Ultimate Foosball game for Makevention tomorrow, Friday, at 7pm. Mouse and I will be hauling the game over to the Convention Center at 7pm and then we will unload it and start attaching the supports to the walls. We will also be connecting the wall pieces together. >> >> We will need people to help and drills to make the work go quickly. If you have a battery operated drill and a phillips screwdriver bit, bring them along and come help us assemble the game. With enough people, work should go quickly. >> >> You can either meet us at the space and we can go over together, or you can meet us at the Convention Center shortly after 7pm. It shouldn't take us too long to get the trailer hooked up and brought over. >> >> If you are coming, I would appreciate it if you dropped me a note. But even if you don't, come on by and lend a hand. >> >> Thanks in advance, >> >> Jenett >> >> _______________________________________________ >> Bloominglabs-announce mailing list >> Bloominglabs-announce at bloominglabs.org >> _______________________________________________ >> Bloominglabs-announce mailing list >> Bloominglabs-announce at bloominglabs.org >> http://www.bloominglabs.org/mailman/listinfo/bloominglabs-announce > From jtillots at gmail.com Mon Aug 29 08:07:26 2016 From: jtillots at gmail.com (Jenett Tillotson) Date: Mon, 29 Aug 2016 08:07:26 -0400 Subject: [Bloominglabs-announce] Foosball game Message-ID: Thanks to everyone who helped me build the foosball game. We played it all afternoon at Makevention and everyone had a great time. I couldn't have done it without all your help. You all rock! So, the next question is what to do with it. Would people like to set it up one more time to play it? Perhaps at a Wednesday public night? Perhaps at Halloween? It should be fairly easy to assemble again especially with a bunch of people helping. It took 6 of us a couple of hours to set it up. Now that we've done it once, I bet we could do it in half that time. And with more people helping, it would be super quick. After that, I am planning on giving away the materials. If there are uses for it at the space, I'd love to see us make use of it there. Also, several people have asked me for the materials, and I'll give first dibs to people who helped build it. If you are interested in any of plywood or 2x2's, send me an email and tell me what you're interested in. Thanks again. Makevention was a great time. I heard nothing but good things from people about it. Jenett -------------- next part -------------- An HTML attachment was scrubbed... URL: From jtillots at gmail.com Tue Aug 30 08:33:17 2016 From: jtillots at gmail.com (Jenett Tillotson) Date: Tue, 30 Aug 2016 08:33:17 -0400 Subject: [Bloominglabs-announce] Missing power drill Message-ID: O'm missing a power drill from when we put together the foosball game at Makevention. Does anyone know where it might be? I borrowed it from work (Aaron, don't read this message), and it's not in my car. Did it get taken back to the space? Jenett -------------- next part -------------- An HTML attachment was scrubbed... URL: From jtillots at gmail.com Tue Aug 30 08:37:33 2016 From: jtillots at gmail.com (Jenett Tillotson) Date: Tue, 30 Aug 2016 08:37:33 -0400 Subject: [Bloominglabs-announce] Missing power drill In-Reply-To: References: Message-ID: That's probably it. You say it's in the laser room right now? I'll stop by and check it out. Thanks! Jenett On Tuesday, August 30, 2016, James Torre wrote: > There was a drill in the box of bubble making supplies that I last saw in > the laser room, on Sunday. > > (Note that said box of supplies will be dealt with this week.) > > --jpt4 > > On Tue, Aug 30, 2016 at 8:33 AM, Jenett Tillotson via Bloominglabs-members > > > wrote: > >> O'm missing a power drill from when we put together the foosball game at >> Makevention. Does anyone know where it might be? I borrowed it from work >> (Aaron, don't read this message), and it's not in my car. Did it get taken >> back to the space? >> >> Jenett >> >> _______________________________________________ >> Bloominglabs-members mailing list >> Bloominglabs-members at bloominglabs.org >> >> http://www.bloominglabs.org/mailman/listinfo/bloominglabs-members >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From torreaiworks01 at gmail.com Tue Aug 30 08:35:35 2016 From: torreaiworks01 at gmail.com (James Torre) Date: Tue, 30 Aug 2016 08:35:35 -0400 Subject: [Bloominglabs-announce] [Bloominglabs-members] Missing power drill In-Reply-To: References: Message-ID: There was a drill in the box of bubble making supplies that I last saw in the laser room, on Sunday. (Note that said box of supplies will be dealt with this week.) --jpt4 On Tue, Aug 30, 2016 at 8:33 AM, Jenett Tillotson via Bloominglabs-members < bloominglabs-members at bloominglabs.org> wrote: > O'm missing a power drill from when we put together the foosball game at > Makevention. Does anyone know where it might be? I borrowed it from work > (Aaron, don't read this message), and it's not in my car. Did it get taken > back to the space? > > Jenett > > _______________________________________________ > Bloominglabs-members mailing list > Bloominglabs-members at bloominglabs.org > http://www.bloominglabs.org/mailman/listinfo/bloominglabs-members > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jtillots at gmail.com Tue Aug 30 09:04:16 2016 From: jtillots at gmail.com (Jenett Tillotson) Date: Tue, 30 Aug 2016 09:04:16 -0400 Subject: [Bloominglabs-announce] Missing power drill In-Reply-To: References: Message-ID: Hanks, Jimmy. I got it. Jenett On Tuesday, August 30, 2016, James Torre wrote: > As of the this Sunday, box and drill were on the table to the immediate > left as one enters the laser room. > > --jpt4 > > On Tue, Aug 30, 2016 at 8:37 AM, Jenett Tillotson > wrote: > >> That's probably it. You say it's in the laser room right now? I'll stop >> by and check it out. >> >> Thanks! >> >> Jenett >> >> >> On Tuesday, August 30, 2016, James Torre > > wrote: >> >>> There was a drill in the box of bubble making supplies that I last saw >>> in the laser room, on Sunday. >>> >>> (Note that said box of supplies will be dealt with this week.) >>> >>> --jpt4 >>> >>> On Tue, Aug 30, 2016 at 8:33 AM, Jenett Tillotson via >>> Bloominglabs-members wrote: >>> >>>> O'm missing a power drill from when we put together the foosball game >>>> at Makevention. Does anyone know where it might be? I borrowed it from work >>>> (Aaron, don't read this message), and it's not in my car. Did it get taken >>>> back to the space? >>>> >>>> Jenett >>>> >>>> _______________________________________________ >>>> Bloominglabs-members mailing list >>>> Bloominglabs-members at bloominglabs.org >>>> http://www.bloominglabs.org/mailman/listinfo/bloominglabs-members >>>> >>>> >>> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From torreaiworks01 at gmail.com Tue Aug 30 08:39:18 2016 From: torreaiworks01 at gmail.com (James Torre) Date: Tue, 30 Aug 2016 08:39:18 -0400 Subject: [Bloominglabs-announce] Missing power drill In-Reply-To: References: Message-ID: As of the this Sunday, box and drill were on the table to the immediate left as one enters the laser room. --jpt4 On Tue, Aug 30, 2016 at 8:37 AM, Jenett Tillotson wrote: > That's probably it. You say it's in the laser room right now? I'll stop by > and check it out. > > Thanks! > > Jenett > > > On Tuesday, August 30, 2016, James Torre wrote: > >> There was a drill in the box of bubble making supplies that I last saw in >> the laser room, on Sunday. >> >> (Note that said box of supplies will be dealt with this week.) >> >> --jpt4 >> >> On Tue, Aug 30, 2016 at 8:33 AM, Jenett Tillotson via >> Bloominglabs-members wrote: >> >>> O'm missing a power drill from when we put together the foosball game at >>> Makevention. Does anyone know where it might be? I borrowed it from work >>> (Aaron, don't read this message), and it's not in my car. Did it get taken >>> back to the space? >>> >>> Jenett >>> >>> _______________________________________________ >>> Bloominglabs-members mailing list >>> Bloominglabs-members at bloominglabs.org >>> http://www.bloominglabs.org/mailman/listinfo/bloominglabs-members >>> >>> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: