PrintrBot Simple
From Bloominglabs
Jump to navigationJump to search
Bloominglabs has a PrintrBot Simple v1 (1310) 3D printer, controlled with a donated ag150.
Official Documentation
PrintrBot model 1310 is pretty old, and the information on it is not easily available on printrbot.com. All of the official documentation on the "legacy" printrbots can be found in this google drive folder. The (copyrighted) assembly manual can be found here.
Using Locally
Login to the ag150 with username "blabs". Cura software GPL AFFERO V1
Using via Command Line
Login remotely with secure shell: "ssh -XC blabs@192.168.1.137". The Arduino terminal can be used to directly talk to the PrintrBot. Serial is set up to be 115200 baud.
Useful g-codes
M115
reports Firmware installed.
FIRMWARE_NAME: Marlin v1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE Mendel EXTRUDER_COUNT:3
M114
reports position.
M119
reports endpoint status.