Baofeng UV-82 Disassembly

From Bloominglabs
Revision as of 10:15, 5 December 2017 by Gavwhela (talk | contribs) (Add to category)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Baofeng UV-82 Because I could not find any instructions on the internet, here are instructions on how to disassemble the Baofeng UV-82 handheld transceiver.

Remove Belt Clip

2 small philps screws

Unclip Battery

3 unclip battery.jpg 4 remove battery.jpg

Remove Antenna and Volume Knob

5 unscrew antenna.jpg It just pulls straight off.

Unscrew Retaining Rings

7 remove antenna retainer.jpg 8 remove volume retainer.jpg

Pry Open Case

9 unpry bottom clips.jpg 10 bottom popped out.jpg

Remove Rear Case and Circuit Board

11 remove back.jpg

Remove Rubber Pieces

12 rubber jack seal.jpg 13 keypad.jpg

Disassembled

14 disassembled.jpg