All public logs
From Bloominglabs
Combined display of all available logs of Bloominglabs. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(Latest | Earliest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 17:21, 21 November 2021 Avh.on1 (Talk | contribs) automatically marked revision 4755 of page File:Animated-logo-10fps.gif patrolled
- 17:05, 21 November 2021 Avh.on1 (Talk | contribs) uploaded a new version of "File:Silhouette-inserting-blade-cartridge.gif" (reduced file size with visually-acceptable lossy compression from https://ezgif.com/optimize)
- 16:47, 21 November 2021 Avh.on1 (Talk | contribs) uploaded a new version of "File:Silhouette-adjusting-generic-blade-depth.gif" (reduced size (without degrading quality) by optimizing transparency with https://ezgif.com/optimize)
- 21:07, 27 October 2021 Avh.on1 (Talk | contribs) uploaded "File:Makerfarm Firmware Guide.pdf" (instructions for installing and configuring the firmware on the Makerfarm 12-Inch Pegasus)
- 21:02, 27 October 2021 Avh.on1 (Talk | contribs) uploaded "File:MakerfarmPegasusDirectDE.stl" (Extruder block for the Makerfarm Pegasus 12-Inch 3d printer's extruder. This part is fragile and has been reprinted several times.)
- 20:55, 27 October 2021 Avh.on1 (Talk | contribs) uploaded "File:Pegasus Single Extruder.pdf" (Assembly instructions for the extruder that came with the Makerfarm Pegasus 12-Inch 3D printer kit)
- 20:51, 27 October 2021 Avh.on1 (Talk | contribs) uploaded "File:12 Pegasus Frame v2.pdf" (Build instructions for the V2 frame of the Makerfarm 12-Inch Pegasus 3D printer)
- 20:41, 27 October 2021 Avh.on1 (Talk | contribs) uploaded "File:12 Pegasus Printer.pdf" (Assembly instructions for the Makerfarm 12-Inch Pegasus. Archived from [https://drive.google.com/file/d/0B80A_woXoRWdMjFLb3hZS0VDcW8/view?resourcekey=0-mvo1w4tZ6Eh1RNMLOhvUKQ google drive].)
- 06:00, 28 July 2021 Avh.on1 (Talk | contribs) moved page Makerfarm 12-Inch Pegasus 3D Printer to Makerfarm 12-Inch Pegasus (don't have "kind of tool" in tool's page's title)
- 03:57, 20 November 2017 Avh.on1 (Talk | contribs) uploaded "File:PrintrbotPlaySlic3rSettings20171120.ini.zip" (Slic3r settings for the PrintrBot_Play. Based off of Cura's [https://github.com/Ultimaker/Cura/blob/master/resources/definitions/printrbot_play.def.json Printrbot Play settings], with some (mostly speed and cooling) modifications.)
- 04:33, 18 September 2017 Avh.on1 (Talk | contribs) uploaded "File:Silhouette-adjusting-generic-blade-depth.gif" (Animation created from File:Silhouette-adjusting-generic-blade-depth.blend.zip showing how the blade depth of the generic cartridge for the Silhouette Cameo is adjusted.)
- 04:31, 18 September 2017 Avh.on1 (Talk | contribs) uploaded "File:Silhouette-adjusting-generic-blade-depth.blend.zip" ([https://www.blender.org/ .blend] file of a generic blade cartridge for the [Silhouette Cameo], animated and rigged so that the knob turns to change the depth of the blade.)
- 22:06, 17 September 2017 Avh.on1 (Talk | contribs) uploaded "File:Silhouette-inserting-blade-cartridge.gif" (Animation illustrating how to insert a cartridge into the Silhouette Cameo.)
- 21:29, 17 September 2017 Avh.on1 (Talk | contribs) uploaded "File:Silhouette-unofficial-knife-cartridge.jpg" (Unbranded knife cartridge for the Silhouette Cameo. The blade can be seen protruding in the bottom-left corner of the image.)
- 21:28, 17 September 2017 Avh.on1 (Talk | contribs) uploaded "File:Silhouette-unofficial-knife-in-tube.jpg" (An unbranded knife cartridge for the Silhouette Cameo in its protective plastic tube. The lid of the tube is in the top-right of the image.)
- 21:20, 17 September 2017 Avh.on1 (Talk | contribs) uploaded "File:Silhouette-official-knife-cartridge.jpg" (A webcam picture of a silhouette-brand knife cartridge for the [Silhouette_Cameo]. The knife can be seen protruding at the bottom-left of the image.)
- 22:56, 25 August 2017 Avh.on1 (Talk | contribs) uploaded "File:Pong-v3.zip" (Improved version of Oscilloscope Pong, written by avh.on1 on 25 August 2017. This version improves on V2 by: - only starting the ball at reasonable angles - doesn't occasionally let the ball pass through the paddle - matches the labeling of the control...)
- 02:24, 15 July 2017 Avh.on1 (Talk | contribs) uploaded "File:Silhouette cameo manual.pdf" (user manual for first-generation silhouette cameo CNC paper/vinyl cutter)
- 05:04, 4 July 2017 Avh.on1 (Talk | contribs) uploaded "File:Animated-logo-10fps.gif" (A 10-frame-per-second render of Animated-logo-siml.svg This version should work in all browsers. Animation created with aniGen.org version 0.8.1 Frames stitched into gif with ImageJ Gif optimized by gifsicle)
- 05:01, 4 July 2017 Avh.on1 (Talk | contribs) uploaded "File:Animated-logo-siml.svg" (An animated version of DAKMH's new shirt logo. Animation is implemented in SIML, written by hand into the XML file. Will most likely not work in any version of Internet Explorer, and will one day not work in Chrome.)
- 09:42, 31 March 2017 Avh.on1 (Talk | contribs) uploaded "File:Pong-v2.zip" (Second reincarnation of arduino-driven pong game on an oscilloscope. Just like the first, this was written in one (long) night by Alex Von Hoene.)
- 16:13, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger whiteboard-schematic.jpg" (Schematic of the Krieger Dreamer Peeper drawn immediately before its construction.)
- 15:50, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger top.jpg" (Top view of the Krieger Dreamer Peeper, showing how the barrel is attached to the body.)
- 15:48, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger side.jpg" (Left view of the Kriedger Dreamer Peeper.)
- 15:47, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger right.jpg" (Front-right view of the Krieger Dreamer Peeper.)
- 15:45, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger light-and-squirt-detail.jpg" (Detail of the front of the Krieger Dreamer Peeper, showing how the pump from the squirt gun was fitted into the barrel. The Brass rod plugs the top of the reservoir, and the trigger (or "key") is fitted immediately before operation.)
- 15:39, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger iso-front.jpg" (Front view of the Krieger Dreamer Peeper, showing the squirt gun and fan-grill "dream condensate collimator")
- 14:01, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger high-amperage-connection-detail.jpg" (Detail showing how the 10-watt LEDs were nailed to brass strips, and how the ends of the brass strips were wrapped around the wires that supply power.)
- 13:59, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger electronics-detail.jpg" (The electronics of the Krieger Dreamer Peeper, with very ad-hoc construction. - The switch on the lower-right turns the Peeper on. - ATTiny85 is on bottom-middle. It generates science-fiction sound effects and flashes the lights. - LM7805 voltage regul...)
- 13:47, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger disassebled-parts.jpg" (All of the non-wood components of the Krieger Dreamer Peeper after disassembly.)
- 13:36, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger back-right.jpg" (Back-right view of Alex's "Krieger Dreaer Peeper", showing the slot where the mp3 player plugs in, the Parrot AR battery, and the terminals of the capacitor.)
- 02:13, 10 November 2016 Avh.on1 (Talk | contribs) moved page PrintrBot to PrintrBot Simple (We now have two printrbot 3d printers)
- 14:42, 27 October 2016 Avh.on1 (Talk | contribs) uploaded "File:DriveLightsTest.flac.gz" (Flac version of DriveLightsTest.wav.gz: a 4-second sound that is all silent, except for a 0.05-second long period starting at t=2 seconds where the level is at maximum. Used to drive a logic-level mosfet off of a 3.5 mm headphone jack. It turns out th...)
- 03:27, 27 October 2016 Avh.on1 (Talk | contribs) uploaded "File:DriveLightsTest.wav.gz" (A gzipped file containing a 4-second sound (Microsoft .wav) that is mostly silent, except for 0.05 seconds starting at t=2 seconds where the level is at maximum. This is a test of the signal used to drive the LEDs in avh.on1's Krieger Dreamer Peeper.)
- 23:18, 25 October 2016 Avh.on1 (Talk | contribs) uploaded "File:Futuristic-logo.png" (Early version of the bloominglabs logo with the "Final Frontier" font and the original flowergear.)
- 23:09, 25 October 2016 Avh.on1 (Talk | contribs) uploaded "File:Bloominglabs-logo-nobg.png" (Blooming-gear logo, taken from the top-left corner of the wiki on 25 October 2016)
- 23:57, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:14 disassembled.jpg" (A mostly-dissasembled Baofeng UV-82 handheld transceiver. Top: antenna Second from top: volume knob Third row: antenna retaining ring, volume knob retaining ring Bottom row: battery, belt clip, main circuit board and back case, front case (still held t...)
- 23:54, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:13 keypad.jpg" (The removable rubber keypad of a Baofeng UV-82.)
- 23:53, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:12 rubber jack seal.jpg" (Piece of rubber that seals the input and output jacks of a Baofeng UV-82. It is in between the case and the circuit board.)
- 23:53, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:11 remove back.jpg" (Removing the back of the case of a Baofeng UV-82. If the retaining rings on the antenna connector and volume knob have been removed, it will lift and slide out easily.)
- 23:52, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:10 bottom popped out.jpg" (The clips holding the bottom of a Baofeng UV-82 case together, separated.)
- 23:51, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:9 unpry bottom clips.jpg" (Prying the bottom of the case of a Baofeng UV-82 apart with a small screwdriver.)
- 23:51, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:8 remove volume retainer.jpg" (Unscrewing the recessed retaining ring for the volume knob of a Baofeng UV-82.)
- 23:50, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:7 remove antenna retainer.jpg" (Unscrewing the recessed retaining ring for the antenna connector of a Baofeng UV-82.)
- 23:49, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:6 remove volume knob.jpg" (Lifting off the volume knob of a Baofeng UV-82.)
- 23:48, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:5 unscrew antenna.jpg" (Removing the antenna of a Baofeng UV-82.)
- 23:48, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:4 remove battery.jpg" (Removing the battery of a Baofeng UV-82.)
- 23:48, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:3 unclip battery.jpg" (Squeezing the clips to remove the battery of a Baofeng UV-82.)
- 23:47, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:2 remove belt clip.jpg" (Unscrewing the belt clip of a Baofeng UV-82.)
- 23:46, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:1 whole radio.jpg" (Baofeng UV-82 handheld transceiver, fully assembled.)